MSDUSA 20 Pack Solderless LED Band Connectors 2 Pin 8mm Transparent Quick Connect for 12V/24V Single Color LED Tape Lights Includes Screwdriver

Why need this 2Pin led Band light connector? Traditional LED tape connector design structure decide it is not very reliable easy make the light flash or turn off with small move break up the Band light need purchase led wire alone etc.All of these make them not suit for home user. MSDUSA design this COB led Band light connectors solve these problems easy for end consumers electrician or DIY. Before buy this led connector check up your led Band light PCB Width and Waterproof Rate. Only suit for 8mm width SMD2835/5050/3014/5060 led Band light and 8mm width COB led Band light. Only suit for IP20/IP44 Non-waterproof and IP65 silicone glued wateproof. Not suit for 10mm width SMD2835/5050 RGB color changable led Band light. How to use this 8mm 2 PIN led connector Connect led Band with wire to the driver 1.Cut off led Band light from one rol1. 2.Take off 5mm long 3M tape on back of the Band light. 3.Plug in led Band light and screw down. make sure it is tight. 4.Plug in Household cable or led wire and screw down. pay attetion to + - polarity. 5.Power on led driver to check if the light turn on(if not screw down more the screws). 6.Fix this led connector with 3M tape on button. 7.Put the protect cover on(avoid touching by Children). Connect Band light and Band light(suit for corner or long distance connect). 1.Plug in led Band ligh and screw down (both). 2.Plug in wire at both connectors then screw down. Electric parameter: Working Voltage: 5 - 24VDC Max Amperage: 5V-4A 12V - 6A / 24V - 6A Input Wire Rang:16AWG-22AWG Max 2.2mm diameter (inner single wire) Included Accessories: screw driver and screws Working Environment1:Indoor Ambient Temperature:-4 - 122F (-20 - 50C) Material: Polycarbonate Color:transparent