Tweco® Tweco® 24, Standard Series Nozzle For Tweco® Genuine MIG Guns

Item Details:

Tweco® Standard 1/2" Short Stop Slip on Nozzle Professional 24 Series Air Cooled Nozzles are offered in 2-piece, coarse (CT) and fine thread (FN) series, as well as slip-on. 2-piece nozzles require 34CT or 34FN Insulator. Sold separately.

Features

• Easy identification - part no rolled stamped on the outside surface
• 3-piece design - does not require an additional insulator
• Nozzle housing - cut and formed from 122 dhp copper alloy tubing
• Nozzle insulator - made from g7 silicone material, providing the electrical insulation needed from the gas diffuser
• Nozzle Insert - machined from a solid brass allow and is crimped in place to allow the nozzle to slide over a metal spring which is part of the gas diffuser
• Recessed Tips are generally used for higher heat applications where longer electrical stick-out is required, or in cases where the nozzle may touch the work piece (tack, spot, and stitch)
• Flush Tips are generally used where a shorter electrical stick-out is used sometimes resulting in shorter/tighter arc lengths, This brings the tip closer to the work piece
• Protruding Tips are generally used when welding open root pipe or any joint that requires the welder to get into a tight weld joint. However the down side to this is the chance of arcing the tip to the work piece, which could damage front end parts resulting in downtime needed to replace

Product Attributes: